AI & ChatGPT searches , social queries for ISO 11170
Search references for ISO 11170. Phrases containing ISO 11170
See searches and references containing ISO 11170!
Search references for ISO 11170. Phrases containing ISO 11170
See searches and references containing ISO 11170!ISO 11170
Published standard
ISO 11170:2003 is an international standard which defines a sequence of tests for verifying filter elements. It can be used to check their hydraulic,
ISO_11170
Standard defining codes for currencies
ISO 4217 is a standard published by the International Organization for Standardization (ISO) that defines alpha codes and numeric codes for the representation
ISO_4217
International standards for dates and times
edited 2729 Tokina8937s ago by ~2026-44013-09 ( talk contribs log accounts ). ISO 8601 is an international standard covering the worldwide exchange and communication
ISO_8601
Diagrams for the chemical and petrochemical industry
engineering diagrams. ISO 10628 consists of the following parts: Part 1: Specification of Diagrams (ISO 10628-1:2014) Part 2: Graphical Symbols (ISO 10628-2:2012)
ISO_10628
Series of standards for 8-bit character encodings
Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Each part is numbered: ISO/IEC 8859-1, ISO/IEC 8859-2, etc. There are
ISO/IEC_8859
Information security standard
ISO/IEC 27001, titled Information security, cybersecurity and privacy protection — Information security management systems — Requirements, is an information
ISO/IEC_27001
International standards on biocontamination control for cleanrooms
ISO 14698 Standards features two International Standards on biocontamination control for cleanrooms. IEST, the Secretariat and Administrator of ISO Technical
ISO_14698
International standards development organization
The International Organization for Standardization (ISO) is an independent, non-governmental, international standard development organization composed
International Organization for Standardization
International_Organization_for_Standardization
Withdrawn ISO standard
1992) is the ISO standard describing the International System of Units (SI). The ISO 1000:1992 standard was withdrawn in 2009 together with ISO 31, and are
ISO_1000
International standard for romanization of Arabic script
The international standard ISO 233 establishes a system for romanization of Arabic script. It was supplemented by ISO 233-2 in 1993 which is specific for
ISO_233
Technical standard for safety symbols
ISO 7010 is a technical standard by the International Organization for Standardization for graphical hazard symbols on hazard and safety signs, including
ISO_7010
Set of international standards for quality management systems
The ISO 9000 family is a set of international standards for quality management systems. It was developed in March 1987 by the International Organization
ISO_9000_family
International standard for automobile electronics
tests. ISO 16750 has five parts: ISO 16750-1: General ISO 16750-2: Electrical loads ISO 16750-3: Mechanical loads ISO 16750-4: Climatic loads ISO 16750-5:
ISO_16750
Set of international standards for environment management systems
The ISO 14000 family is a set of international standards for environment management systems. It was developed in March 1996 by International Organization
ISO_14000_family
Standard for electronic data interchange between financial institutions
ISO 20022 is widely used in financial services. ISO 20022 is the successor to ISO 15022; originally ISO 20022 was called ISO 15022 2nd Edition. ISO 15022
ISO_20022
for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards
List of ISO standards 3000–4999
List_of_ISO_standards_3000–4999
Superseded standard on quantities and units
revised and replaced by ISO/IEC 80000. The standard comes in 14 parts: ISO 31-0: General principles (replaced by ISO/IEC 80000-1:2009) ISO 31-1: Space and time
ISO_31
Digital multimedia format for storing video and audio
a standard specified as a part of the MPEG-4 specifications, formally as ISO/IEC 14496-14:2003. Unlike the audio-only compression formats MP3 and MP2
MP4_file_format
Systems engineering standard on processes and lifecycle stages
The ISO/IEC 15288 Systems and software engineering — System life cycle processes is a technical standard in systems engineering which covers processes
ISO/IEC_15288
Part of international standard ISO 31
ISO 31-10 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to nuclear reactions and ionizing
ISO_31-10
Standard for language representation
ISO 639 is a standard by the International Organization for Standardization (ISO) concerned with the representation of languages and language groups. It
ISO_639
Family of IT asset management standards
International standards in the ISO/IEC 19770 family of standards for IT asset management address both the processes and technology for managing software
ISO/IEC_19770
Information security standard
ISO/IEC 27002 is an information security standard published by the International Organization for Standardization (ISO) and by the International Electrotechnical
ISO/IEC_27002
ISO standard
and IEST petitioned to ISO for new standards, the first document of ISO 14644 was published in 1999, ISO 14644-1. In 2000, ISO 14644-2 was published,
ISO_14644
ISO standard
ISO 19092 Financial Services - Biometrics, released as ISO 19092 Financial Services - Biometrics - Part 1: Security framework, is an ISO standard and describes
ISO_19092
International standard for technical drawings
ISO 128 is the International Organization for Standardization (ISO) standard covering the general principles of presentation in technical drawings, specifically
ISO_128
Management system standard
ISO 28000:2022, Security and resilience – Security management systems – Requirements, is a management system standard published by International Organization
ISO_28000
International standard for occupational health and safety management systems
ISO 45001 is an international standard for occupational health and safety management systems. It was developed in March 2018 by International Organization
ISO_45001
Reference model for network communication
reference model developed by the International Organization for Standardization (ISO) that "provides a common basis for the coordination of standards development
OSI_model
Standard codes for identifying languages
ISO 639-1:2002, Codes for the representation of names of languages—Part 1: Alpha-2 code, is the first part of the ISO 639 series of international standards
ISO_639-1
International standard which classifies intermodal freight shipping containers
ISO 668 – Series 1 freight containers – Classification, dimensions and ratings is an ISO international standard which nominally classifies intermodal freight
ISO_668
Standard codes for geographical names
ISO 3166 is a standard published by the International Organization for Standardization (ISO) that defines codes for the names of countries, dependent
ISO_3166
Character set
ISO-8859-8-I is the IANA charset name for the character encoding ISO/IEC 8859-8 used together with the control codes from ISO/IEC 6429 for the C0 (00–1F
ISO-8859-8-I
International standard
ISO/IEC/IEEE 42010 Systems and software engineering — Architecture description is an international standard for architecture descriptions of systems and
ISO/IEC_42010
Technical standard for safety symbols
ISO 3864 is an International Organization for Standardization technical standard for safety signs and markings in workplaces and public facilities. These
ISO_3864
International standard for three-letter codes identifying languages
ISO 639-2:1998, Codes for the representation of names of languages — Part 2: Alpha-3 code, is the second part of the ISO 639 standard, which lists codes
ISO_639-2
General requirements for the competence of testing and calibration laboratories
known as ISO/IEC Guide 25, ISO/IEC 17025 was initially issued by ISO/IEC in 1999. There are many commonalities with the ISO 9000 standard, but ISO/IEC 17025
ISO/IEC_17025
4999 ISO 5000 – ISO 7999 ISO 8000 – ISO 9999 ISO 10000 – ISO 11999 ISO 12000 – ISO 13999 ISO 14000 – ISO 15999 ISO 16000 – ISO 17999 ISO 18000 – ISO 19999
List_of_ISO_standards
Former ISO and IEC standard
ISO/IEC 9126 Software engineering — Product quality was an international standard for the evaluation of software quality. It has been replaced by ISO/IEC
ISO/IEC_9126
International standard for 7-bit ASCII and national modifications
ISO/IEC 646, is an ISO/IEC standard in the field of character encoding. It is equivalent to the ECMA standard ECMA-6 and developed in cooperation with
ISO/IEC_646
Functional safety standard
ISO 13849 is a safety standard which applies to parts of machinery control systems that are assigned to providing safety functions (called safety-related
ISO_13849
International management system standard
ISO 21001, Educational Organization Management Systems, is a published international standard by the International Organization for Standardization, and
ISO_21001
ISO standard
ISO 965 (ISO general purpose metric screw thread—tolerances) is an International Organization for Standardization (ISO) standard for metric screw thread
ISO_965
ISO standard
ISO 14971 Medical devices — Application of risk management to medical devices is a voluntary consensus standard, published by International Organization
ISO_14971
Series of international standards for the romanization of Hebrew
ISO 259 is a series of international standards for the romanization of Hebrew characters into Latin characters, dating to 1984, with updated ISO 259-2
ISO_259
ISO standard
ISO 15022 is an ISO standard for securities messaging used in transactions between financial institutions. Participants in the financial industry need
ISO_15022
Guidance on project management
ISO 21500, Guidance on Project Management, is an international standard developed by the International Organization for Standardization, or ISO starting
ISO_21500
International standard
ISO 25964 is the international standard for thesauruses, published in two parts as follows: ISO 25964 Information and documentation - Thesauri and interoperability
ISO_25964
ISO compliance standard
ISO 19600, Compliance management systems - Guidelines, is a compliance standard introduced by the International Organization for Standardization (ISO)
ISO_19600
International energy management standard
ISO 50001 Energy management systems - Requirements with guidance for use, is an international standard created by the International Organization for Standardization
ISO_50001
Character set developed by ISO
ISO 5426 ("Extension of the Latin alphabet coded character set for bibliographic information interchange") is a character set developed by ISO, similar
ISO_5426
Food safety Management System Standard
ISO 22000 is a food safety management system by the International Organization for Standardization (ISO) which is outcome focused, providing requirements
ISO_22000
Higher-level 7-bit and 8-bit character encoding system
ISO/IEC 2022 Information technology—Character code structure and extension techniques, is an ISO/IEC standard in the field of character encoding. It is
ISO/IEC_2022
International standard
2025-04-26. "ISO 19011:2018". ISO. Retrieved 2025-04-26. "ISO 10011-1:1990". ISO. Retrieved 2025-04-26. "ISO 19011:2002". ISO. Retrieved 2025-04-26. "ISO 19011:2011"
ISO_19011
International standard
ISO 9 is an international standard establishing a system for the transliteration into Latin characters of Cyrillic characters constituting the alphabets
ISO_9
International standard
ISO/IEC 17024: Conformity assessment - General requirements for bodies operating certification of persons is an ISO/IEC standard which specifies criteria
ISO/IEC_17024
for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards
List_of_ISO_standards_1–1999
Set of technical standards
ISO/IEC 15504 Information technology – Process assessment, also termed Software Process Improvement and Capability dEtermination (SPICE), is a set of
ISO/IEC_15504
ISO standard
ISO 10160 is the ISO standard, first published in 1993, that defines the terminology that is used for interlibrary loan transactions between various document
ISO_10160
Set of international standards for risk management
ISO 31000 is a set of international standards for risk management. It was developed in November 2009 by International Organization for Standardization
ISO_31000
Defines two sets of codes for a number of writing systems
ISO 15924, Codes for the representation of names of scripts, is an international standard defining codes for writing systems or scripts (a "set of graphic
ISO_15924
International standard for service management
ISO/IEC 20000-1 is the international standard for IT service management. It was originally developed in 2005 by ISO/IEC JTC1/SC7 and revised in 2011 and
ISO/IEC_20000
ISO standard
ISO 13485 Medical devices -- Quality management systems -- Requirements for regulatory purposes is a voluntary standard, published by International Organization
ISO_13485
Standard symbols for proofreading
ISO 5776, published by the International Organization for Standardization (ISO), is an international standard that specifies symbols for proofreading such
ISO_5776
Part of international standard ISO 31
ISO 31-1 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to space and time. It was superseded
ISO_31-1
International standard for sizes of raw, untrimmed paper
The ISO 217:2013 standard defines the RA and SRA paper formats. These paper series are untrimmed raw paper. RA stands for "raw format A" and SRA stands
ISO_217
ISO standard
ISO 1629, Rubber and latices – Nomenclature is an ISO standard. This standard was originally published in 1976, and was updated in 1987, 1995 (with amendments
ISO_1629
Monolingual thesauri for information retrieval
ISO 2788 was the ISO international standard for monolingual thesauri for information retrieval, first published in 1974 and revised in 1986. The official
ISO_2788
ISO standard temperature, 20°C
ISO 1 is an international standard set by the International Organization for Standardization that specifies the standard reference temperature for geometrical
ISO_1
Standard for financial instrument codes
ISO 10962, known as Classification of Financial Instruments (CFI), is a six-letter-code used in the financial services industry to classify and describe
ISO_10962
ISO standard
ISO 843 is a system for the transliteration and/or transcription of Greek characters into Latin characters. It was released by the International Organization
ISO_843
Family of standards for innovation management systems
"Iso 56000:2020". 17 December 2020. "Iso/Awi 56001". "Iso/Awi 56001". "Iso 56003:2019". 17 December 2020. "Iso/Tr 56004:2019". 17 December 2020. "Iso 56006:2021"
ISO_56000
Multi-part standard from the International Organization for Standardization
ISO 9241 is a multi-part standard from the International Organization for Standardization (ISO) covering ergonomics of human-system interaction and related
ISO_9241
ISO standard for vulcanised rubber
ISO 2921 is a specification created by the International Organization for Standardization for a method in determining the temperature-retraction characteristics
ISO_2921
Guidelines for quality management in projects
Standardization. ISO 10006:2018 gives guidance on the application of quality management in projects. It supersedes ISO 10006:2003. ISO 10006 is applicable
ISO_10006
International standard for financial transaction card originated interchange messaging
ISO 8583 is an international standard for financial transaction card originated interchange messaging. It is the International Organization for Standardization
ISO_8583
International standard codes for language families
Standardization (ISO). It was developed by ISO Technical Committee 37, Subcommittee 2, and first published on May 15, 2008. It is part of the ISO 639 series
ISO_639-5
ISO standard
ISO 4165 is a standard adopted by the International Organization for Standardization (ISO) that describes a double-pole DC connector to supply between
ISO_4165
International standard for identification of organisations
ISO/IEC 6523, Information technology – Structure for the identification of organizations and organization parts, is an international standard that defines
ISO/IEC_6523
ISO/IEC standard
ORCID "ISO Online Browsing Platform". www.iso.org. Retrieved 2025-04-26. "ISO/IEC 7064:2003". ISO. Retrieved 2025-04-26. "ISO 7064:1983". ISO. Retrieved
ISO/IEC_7064
International standard
ISO 5964 was the ISO standard for the establishment and development of multilingual thesauri. Its full title was Guidelines for the establishment and development
ISO_5964
ISO standards
ISO 11784 and ISO 11785 are international standards that regulate the radio-frequency identification (RFID) of animals, which is usually accomplished
ISO_11784_and_ISO_11785
ISO standard regarding industrial automation systems and integration
of ISO 13584 is Industrial automation systems and integration - Parts library, with the acronym PLIB. PLIB is developed and maintained by the ISO technical
ISO_13584
Standard for names and symbols
ISO 31-3 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to mechanics. It was published on
ISO_31-3
ISO standard
Technical Committee 212 (ISO/TC 212). ISO/TC 212 assigned ISO 15189 to a working group to prepare the standard based on the details of ISO/IEC 17025:1999 General
ISO_15189
Standard
ISO/IEC 7812 Identification cards – Identification of issuers is an international standard published jointly by the International Organization for Standardization
ISO/IEC_7812
Public information symbols standard
ISO 7001 ("public information symbols") is a standard published by the International Organization for Standardization that defines a set of pictograms
ISO_7001
International standard for three-letter codes identifying languages
ISO 639-3:2007, Codes for the representation of names of languages – Part 3: Alpha-3 code for comprehensive coverage of languages, is an international
ISO_639-3
ISO standard for bibliographic referencing
ISO 690 is an ISO standard governing bibliographic references in different kinds of documents, including electronic documents. This international standard
ISO_690
Superseded international standard
ISO 31-6 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to light and related electromagnetic
ISO_31-6
International standard on physical quantities and units of measurement
ISO/IEC 80000, Quantities and units, is an international standard describing the International System of Quantities (ISQ). It was developed and promulgated
ISO/IEC_80000
International shipping standard
ISO 6346 is an international standard covering the coding, identification and marking of intermodal (shipping) containers used within containerized intermodal
ISO_6346
ISO/TC37 standard for time and event markup and annotation
ISO 24617-1:2009, ISO-TimeML is the International Organization for Standardization ISO/TC37 standard for time and event markup and annotation. The scope
ISO-TimeML
International standard for business continuity management systems
2012). "ISO publishes new standard for business continuity management". ISO. "ISO 22313:2020". ISO. "Iso/Ts 22317:2021". "Iso/Ts 22318:2021". "ISO/TS 22330:2018"
ISO_22301
Computer network protocol
ISO 11783-1: General standard for mobile data communication ISO 18883-2: Physical layer ISO 11783-3: Data link layer ISO 11783-4: Network layer ISO 11783-5:
ISO_11783
Standard for vehicle-to-grid communications
ISO 15118 Road vehicles -- Vehicle to grid communication interface is an international standard defining a vehicle to grid (V2G) communication interface
ISO_15118
Information security management system standard
ISO/IEC 27000 is one of the standards in the ISO/IEC 27000 series of information security management systems (ISMS)-related standards. The formal title
ISO/IEC_27000
ISO standard
ISO 14617 Graphical symbols for diagrams is a library of graphical symbols for diagrams used in technical applications. ISO 14617 consists of the following
ISO_14617
Standard for document headers etc. in technical drawings
technical standard defined by ISO which describes title block formats to be used in technical drawings. ISO 7200:1984 ISO 7200:2004 ISO 128 for the general principles
ISO_7200
IEC standard
ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards is an international standard that defines proximity cards
ISO/IEC_14443
ISO 11170
ISO 11170
Girl/Female
Teutonic American Spanish German Scottish
Devoted to God.
Surname or Lastname
English
English : variant of Isham.
Male
Polish
Polish form of Latin Ivo, IWO means "yew tree."
Female
Hawaiian
Hawaiian name IPO means "darling, lover, sweetheart."
Male
Native American
Unisex Native American Choctaw name ISI means "deer."
Male
Japanese
(功) Japanese name ISAO means "honor; merit."
Girl/Female
Greek
Daughter of Cadmus.
Boy/Male
Arabic, Malaysian, Muslim, Russian
God's Favourite
Boy/Male
English Teutonic German
Archer's bow.
Boy/Male
German, Polish
Yew Tree
Boy/Male
Arabic, Muslim
Father of Isa
Male
English
Variant spelling of German Yvo, IVO means "yew tree."Â Used infrequently by the English.
Male
Finnish
Finnish form of Hebrew Yishmael, ISMO means "God will hear."
Girl/Female
Hebrew
God's salvation.
Surname or Lastname
English
English : patronymic or metronymic from the Middle English personal name Ida, which was used for both sexes.
Boy/Male
Hindu
God, Lord Vishnu
Female
Native American
Native American Choctaw unisex name ISI means "deer."
Male
Portuguese
Portuguese form of Latin Theodosius, TEODÓSIO means "god-giving."
Male
English
 Short form of English Isaac, ISA means "he will laugh." Compare with another form of Isa.
Girl/Female
Indian
Gold
ISO 11170
ISO 11170
ISO 11170
ISO 11170
ISO 11170
ISO 11170
ISO 11170