AI & ChatGPT searches , social queries for MACHINE CONTROL
Search references for MACHINE CONTROL. Phrases containing MACHINE CONTROL
See searches and references containing MACHINE CONTROL!
Search references for MACHINE CONTROL. Phrases containing MACHINE CONTROL
See searches and references containing MACHINE CONTROL!MACHINE CONTROL
Computer control of machine tools
control (CNC) or CNC machining is the automated control of machine tools by a computer. It is an evolution of numerical control (NC), where machine tools
Computer_numerical_control
Concept in civil engineering
engineering, machine control is used to accurately position earthwork machinery based on 3D design models and GPS systems, and thus aid machine operators
Machine_control
MIDI Machine Control, or MMC, a subset of the MIDI specification, provides specific commands for controlling recording equipment such as multi-track recorders
MIDI_Machine_Control
Laser machine control is an electronic system for automatic operation of land scrapers or excavators. Advanced systems with GPS replaced these laser-based
Laser_machine_control
Means by which a user interacts with and controls a machine
and machines occur. The goal of this interaction is to allow effective operation and control of the machine from the human end, while the machine simultaneously
User_interface
Powered mechanical device
A machine is a thermodynamic system that uses power to apply forces and control movement to perform an action. The term is commonly applied to artificial
Machine
Subfield of machine learning, intelligent control, and control theory
Machine learning control (MLC) is a subfield of machine learning, intelligent control, and control theory which aims to solve optimal control problems
Machine_learning_control
1948 book written by Norbert Wiener
Cybernetics: Or Control and Communication in the Animal and the Machine is a book written by Norbert Wiener and published in 1948. It is the first public
Cybernetics: Or Control and Communication in the Animal and the Machine
Cybernetics:_Or_Control_and_Communication_in_the_Animal_and_the_Machine
Machine for handling or machining metal or other rigid materials
parts of the machine. Thus, the relative movement between the workpiece and the cutting tool (which is called the toolpath) is controlled or constrained
Machine_tool
2009 studio album by Otep
Smash the Control Machine is the fourth studio album from Otep. It was released on August 18, 2009. The album shows a reunion of the band's Sevas Tra
Smash_the_Control_Machine
The history of numerical control (NC) began when the automation of machine tools first incorporated concepts of abstractly programmable logic, and it
History_of_numerical_control
Type of political group
that is characterized by a high degree of leadership control over member activity. The machine's power is based on the ability of the boss or group to
Political_machine
Hardware-assisted virtualization on x86/x86-64 CPUs
technology that accelerates nested virtualization of VMMs. The virtual machine control structure (VMCS) is a data structure in memory that exists exactly
X86_virtualization
is mainly used in complex machine control, instrumentation, and telecommunication applications. Implementing a state machine necessitates the generation
Virtual_finite-state_machine
numerical control (DNC), also known as distributed numerical control (also DNC), is a common manufacturing term for networking CNC machine tools. On some
Direct_numerical_control
two variants of printer control characters: ASA control characters, see ASA carriage control characters. IBM Machine control characters. Described in
IBM Machine Code Printer Control Characters
IBM_Machine_Code_Printer_Control_Characters
Material-removing manufacturing process
Machining is a manufacturing process where a desired shape or part is created using the controlled removal of material, most often metal, from a larger
Machining
Connection standard for electronic musical instruments
Machine" Sound on Sound. SOS Publications. Jun 1996. Print. Glatt, Jeff. "MIDI Machine Control (MMC) Archived 27 November 2012 at the Wayback Machine"
MIDI
controlled language in machine translation poses several problems. In an automated translation, the first step in order to understand the controlled language
Controlled language in machine translation
Controlled_language_in_machine_translation
Mathematical model of computation
simple mechanism that can be modeled by a state machine is a turnstile. A turnstile, used to control access to subways and amusement park rides, is a
Finite-state_machine
Digital archive by the Internet Archive
The Wayback Machine is a digital archive of the World Wide Web founded by the Internet Archive, an American nonprofit organization based in San Francisco
Wayback_Machine
Computerized control system with distributed decision-making
A distributed control system (DCS) is a control system used to control industrial processes in which control functions are distributed among multiple autonomous
Distributed_control_system
The Organization for Machine Automation and Control (OMAC) is a global organization that supports the machine automation and operational needs of manufacturing
Organization for Machine Automation and Control
Organization_for_Machine_Automation_and_Control
Function of management which helps to check errors in order to take corrective actions
modern concepts, control is a proactive action since earlier concepts of control were only used when errors were detected. Control in management includes
Control_(management)
Subset of artificial intelligence
management Knowledge graph embedding Linguistics Machine learning control Machine perception Machine translation Material Engineering Marketing Medical
Machine_learning
Communication between devices
Machine to machine (M2M) is direct communication between devices using any communications channel, including wired and wireless. M2M communication can
Machine_to_machine
How software progresses through its implementation
software, control flow (or flow of control) describes how execution progresses from one command to the next. In many contexts, such as machine code and
Control_flow
Mechatronical technology reducing the ecological impact of machines
piezoelectric bearings for active control of machine vibrations Rapid control prototyping: provides a fast and inexpensive way for control and signal processing engineers
Ecomechatronics
Instructions directly executable by a computer
In computing, machine code is data encoded and structured to control a computer's central processing unit (CPU) via its programmable interface. A computer
Machine_code
Method to analyze non-binary inputs
or 0 (true or false, respectively). Fuzzy logic is widely used in machine control. The term "fuzzy" refers to the fact that the logic involved can deal
Fuzzy_control_system
Abstract machine used as a target for compilers
for stack, environment, control, dump, respectively, which are the internal registers of the machine. The registers stack, control, and dump point to (some
SECD_machine
Aspect of robotics
Force control is the control of the force with which a machine or the manipulator of a robot acts on an object or its environment. By controlling the contact
Force_control
Control device attached to weaving looms
refers to the added control mechanism that automates the patterning. The process can also be used for patterned knitwear and machine-knitted textiles such
Jacquard_machine
Method to control electric motors
Field-oriented control (FOC), also called vector control, is a variable-frequency drive (VFD) control method in which the stator currents of a three-phase
Field-oriented_control
Type of arcade game
number of claw machine arcades in both places rising into the thousands. Also in the 2010s, claw machines that could be remotely controlled via mobile applications
Claw_machine
Control paradigm in which errors are measured before they can affect a system
(process and/or machine being controlled) and the plant's relationship to any inputs or feedback the system might receive. Neither open-loop control nor teleoperator
Feed_forward_(control)
Theoretical computer model
programming languages. A state in a CEK machine includes a control statement, environment and continuation. The control statement is the term being evaluated
CEK_Machine
Type of railroad maintenance vehicle
possible to the lifting lining unit (the clamp). B point is used by the machine control system to position the track correctly using either potentiometers
Tamping_machine
Machine which dispenses products to customers
contactless. A birth control machine is a vending machine for the sale of birth control, such as condoms or emergency contraception. Condom machines are often placed
Vending_machine
Military exercise of authority by a commanding officer over assigned forces
Command and control (abbr. C2) is a "set of organizational and technical attributes and processes ... [that] employs human, physical, and information
Command_and_control
System that manages the behavior of other systems
thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines. The control systems are
Control_system
Casino gambling machine
machine, fruit machine (British English), puggie (Scots), poker machine or pokie machine (Australian and New Zealand English) is a gambling machine that
Slot_machine
Elementary components used in the structure, controls, or mechanisms of a machine
control components such as buttons, switches, indicators, sensors, actuators and computer controllers. While generally not considered to be a machine
Machine_element
Mechanical device that changes the direction or magnitude of a force
85–87. ISBN 978-0-393-32175-3. Armstrong-Hélouvry, Brian (1991). Control of machines with friction. Springer. p. 10. ISBN 978-0-7923-9133-3. This fundamental
Simple_machine
Removal of material from a workpiece using rotating tools
milling machine (often called a mill). After the advent of computer numerical control (CNC) in the 1960s, milling machines evolved into machining centers:
Milling_(machining)
Soviet light machine gun
all Soviet tanks in WWII as either a flexible bow machine gun or a co-axial machine gun controlled by the gunner. It was improved in 1943 producing the
Degtyaryov_machine_gun
Packaging machine industry standard
PackML (Packaging Machine Language) is an industry technical standard for the control of packaging machines, as an aspect of industrial automation. PackML
PackML
2025 film by Benny Safdie
'Smashing Machine' Flopping: "You Can't Control Box Office Results"". The Hollywood Reporter. Retrieved October 6, 2025. "The Smashing Machine". Rotten
The Smashing Machine (2025 film)
The_Smashing_Machine_(2025_film)
.50-caliber heavy machine gun
The M2 machine gun or Browning .50-caliber machine gun (informally, "Ma Deuce") is a heavy machine gun that was designed near the end of World War I by
M2_Browning
Use of various control systems for operating equipment
or self-driven machines advanced grain mills, furnaces, boilers, and the steam engine created a new requirement for automatic control systems including
Automation
Method of quality control
Statistical process control (SPC) or statistical quality control (SQC) is the application of statistical methods to monitor and control the quality of a
Statistical_process_control
Rotating or sliding component that transmits variable motion to a follower
similar, and these were widely used for electric machine control (an electromechanical timer in a washing machine being a common example) before the advent of
Cam_(mechanism)
for loading virtual-machine control structures (VMCSs), which hold the state of the guest and host, along with fields which control processor behavior
List of x86 virtualization instructions
List_of_x86_virtualization_instructions
Late 19th-century machine for summarizing information stored on punch cards
business applications such as accounting and inventory control. It spawned a class of machines, known as unit record equipment, and the data processing
Tabulating_machine
English indie rock band
Florence and the Machine (stylised as Florence + the Machine) are an English indie rock band formed in London in 2007 by lead vocalist Florence Welch
Florence_and_the_Machine
Mechanical devices used to simulate human sexual activity
combines the use of various sex machines and a web interface, controlled remotely by a partner. Modern sex machines on the market include vacuum pumps
Sex_machine
Artificial intelligence control techniques
control Machine learning control Reinforcement learning Bayesian control Fuzzy control Neuro-fuzzy control Expert Systems Genetic control New control
Intelligent_control
1978 studio album by Judas Priest
Killing Machine (alternatively titled Hell Bent for Leather) is the fifth studio album by English heavy metal band Judas Priest, released in November
Killing_Machine
Room, building or company where machining is done
production machining (both batch production and mass production) is much more automated than it was before the development of CNC, programmable logic control (PLC)
Machine_shop
improved control of the machine in relation to the intended or designed direction of travel. List of emerging technologies "Machine Control, Guidance and Automation
Machine_guidance
Type of computer
programming language implementations, a stack machine is a computer processor or a process virtual machine in which the primary interaction is moving short-lived
Stack_machine
1992 book by Kevin Kelly
Out of Control: The New Biology of Machines, Social Systems, and the Economic World (ISBN 978-0201483406) is a 1992 book by Kevin Kelly. Major themes in
Out_of_Control_(Kelly_book)
Hong Kong border checkpoint
by Control Point". Annual Report 2015. Immigration Department. Immigration Control Points Archived April 16, 2009, at the Wayback Machine Control Point
Lo_Wu_Control_Point
Abstract machine used in a formal logic and theoretical computer science
list of (usually sequential) arithmetic and control instructions for the machine to follow. The counter machine is typically used in the process of designing
Counter_machine
2013 studio album by the Strokes
Comedown Machine is the fifth studio album by American rock band the Strokes. It was released on March 26, 2013, through RCA Records. The band decided
Comedown_Machine
Torque regulation method for three-phase AC motors
dc voltage transients Synchronization to rotating machine is straightforward due to the fast control; Just make the torque reference zero and start the
Direct_torque_control
Computation model defining an abstract machine
machine is an idealised model of a central processing unit (CPU) that controls all data manipulation done by a computer, with the canonical machine using
Turing_machine
Electron flow-powered mechanical device
provide speed control. Other machine combinations include the Kraemer and Scherbius systems. Electromagnetic-rotor machines are machines having some kind
Electric_machine
Electronic musical instrument that creates percussion sounds
A drum machine is an electronic musical instrument that creates percussion sounds, drum beats, and patterns. Drum machines may imitate drum kits or other
Drum_machine
Measures to ensure concurrent computing operations generate correct results
programming, operating systems, multiprocessors, and databases, concurrency control ensures that correct results for concurrent operations are generated, while
Concurrency_control
Technology and methods used to provide imaging-based automatic inspection and analysis
applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and
Machine_vision
Type of machine
A crane is a machine used to move materials both vertically and horizontally, utilizing a system of a boom, hoist, wire ropes or chains, and sheaves for
Crane_(machine)
2000 single by Rage Against the Machine
Nineteen Eighty-Four, which reads, "Who controls the past controls the future: who controls the present controls the past." A song titled "Testify" was
Testify (Rage Against the Machine song)
Testify_(Rage_Against_the_Machine_song)
Computer-controlled cutting machine
A computer numerical control (CNC) router is a computer-controlled cutting machine which typically mounts a hand-held router as a spindle which is used
CNC_router
Control panel using electrical patch cords
complete an electrical circuit. Control panels are sometimes used to direct the operation of unit record equipment, cipher machines, and early computers. The
Plugboard
Machine for manufacturing plastic products
drive unit, and control systems. Injection molding machine molds can be fastened in either a horizontal or vertical position. Most machines are horizontally
Injection_molding_machine
products and technology for positioning, heading, guidance, navigation, machine control, and L-band correction service applications. Its products and technology
Hemisphere_GNSS
structured into the program. Control logic can be modeled using a state diagram, which is a form of hierarchical state machine. These state diagrams can
Control_logic
as in the paper produced by a paper machine. Generally, a control system is concerned with measurement and control of one or multiple properties in time
Quality control system for paper, board and tissue machines
Quality_control_system_for_paper,_board_and_tissue_machines
1990 video game
Star Control: Famous Battles of the Ur-Quan Conflict, Volume IV is an action-strategy video game developed by Toys for Bob and published by Accolade.
Star_Control
American rock band
Rage Against the Machine (often abbreviated as RATM or shortened to Rage) was an American rock band formed in Los Angeles, California, in 1991. It consisted
Rage_Against_the_Machine
Description of an algorithm that resembles a computer program
intended for human reading rather than machine control. Pseudocode typically omits details that are essential for machine implementation of the algorithm, meaning
Pseudocode
Abstract model of computation
random-access machine (RAM or RA-machine) is a model of computation that describes an abstract machine in the general class of register machines. The RA-machine is
Random-access_machine
Piece of light construction equipment
controlled: Ride-on power trowels have two spider/rotor assemblies and are controlled by an operator sitting on a seat upon the machine, controlling the
Power_trowel
Finnish radio modem manufacturer
technology for various industrial applications i.a. land surveying, SCADA, machine control, intelligent transportation systems, telemetry, environmental monitoring
SATEL
Field of automation which studies how to precisely move parts of machines
Motion control is a sub-field of automation, encompassing the systems or sub-systems involved in moving parts of machines in a controlled manner. Motion
Motion_control
German cipher machine during World War II
The Enigma machine is a cipher device developed and used in the early- to mid-20th century to protect commercial, diplomatic, and military communication
Enigma_machine
Electromechanical machines which processed data using punch cards
operation of many machines was directed by the use of a removable plugboard, control panel, or connection box. Initially all machines were manual or electromechanical
Unit_record_equipment
Machine that washes clothes
washing machine (laundry machine, clothes washer, or washer) is a machine designed to launder clothing. The term is mostly applied to machines that use
Washing_machine
Component of CNC software
CNC software into machine tool data, to be used in CAM systems. A post processor generates the G-code used by the machine control module. The generated
Post_processor
U.S. Military adopted variant of the FN MAG
mechanisms of the machine gun to provide a consistent rate of fire, ensuring proper function and accuracy. The rate of fire may be controlled by three different
M240_machine_gun
Belgian satellite navigation company
professional fields such as land and airborne surveying, mobile mapping, machine control, precision agriculture, mining, transport, offshore applications, construction
Septentrio
Fully automatic firearm
Gatling, was the first to offer controlled, sequential fire with mechanical loading, its key features being the machine loading of prepared cartridges
Machine_gun
Method for making advanced optical elements
SPDT today is done with computer numerical control (CNC) machine tools. Diamonds also serve in other machining processes, such as milling, grinding, and
Diamond_turning
Set of instructions used to control the behavior of a machine
A program is a set of data or instructions that controls the behavior of a machine. Examples include: The automatic flute player, which was invented in
Program_(machine)
machines as a human trustee, his primary function being to deliver updates of the thinking machine ruler, the evermind Omnius, to machine-controlled worlds
List_of_Dune_characters
U.S. military program to develop small arms
M249 SAW light machine gun, and the 7.62mm M240 machine gun, with a common system of 6.8mm cartridges and to develop small arms fire-control systems for
Next_Generation_Squad_Weapon
Machine used to stitch fabric
A sewing machine is a machine used to sew fabric and materials together with thread. Sewing machines were invented during the first Industrial Revolution
Sewing_machine
Processes that maintain quality at a constant level
Quality control (QC) is a process by which entities review the quality of all factors involved in production. ISO 9000 defines quality control as "a part
Quality_control
Engineering discipline that deals with control systems
application of control theory. Control engineering plays an essential role in a wide range of control systems, from simple household washing machines to high-performance
Control_engineering
MACHINE CONTROL
MACHINE CONTROL
Female
English
Feminine form of English Max, MAXINE means either "the greatest rival" or "the stream of Mack."Â
Male
Scottish
Pet form of Scottish Gaelic Lachlann, LACHIE means "lake-land."
Female
Native American
Native American Hopi name KACHINA means "sacred dancer; spirit."
Female
English
Variant spelling of English Maureen, MAURINE means "obstinacy, rebelliousness" or "their rebellion."
Female
French
Feminine form of French Marin, MARINE means "of the sea."
Surname or Lastname
English
English : occupational name for a stonemason, Anglo-Norman French machun, a Norman dialect variant of Old French masson (see Mason).
Female
Scottish
Feminine form of Scottish Lachlan, LACHINA means "lake-land."
Girl/Female
Australian, Japanese
Child of Machi
Female
German
German form of Scottish Malvina, MALWINE means "smooth-brow."
Boy/Male
American, Australian
Weighing Machine
Female
Hawaiian
Hawaiian name MAHINA means "moon; moonlight."
Male
Hindi/Indian
(सचिन) Hindi myth name borne by Indra, SACHIN means "pure."
Female
Yiddish
(×™Ö·×—Ö°× Ö¶×¢) Yiddish form of Hebrew Yochana, YACHNE means "God is gracious."Â
Male
English
Variant spelling of English unisex Macey, MACIE means "gift of God."
Male
Hebrew
Variant spelling of Hebrew Yakiyn, YACHIN means "he establishes" or "whom God strengthens."Â
Surname or Lastname
English
English : variant spelling of Machen.Spanish (MachÃn) : probably a nickname from machÃn ‘boor’, ‘lout’, often applied to a blacksmith’s apprentice.French : nickname from Old French machin ‘scheming’.
Male
English
Pet form of English Sacheverell, SACHIE means "roe-buck leap."
Girl/Female
Bengali, Indian
Machine
Male
French
French form of Latin Macarius, MACAIRE means "blessed."
Female
French
French feminine form of Latin Martinus, MARTINE means "of/like Mars."Â
MACHINE CONTROL
MACHINE CONTROL
Boy/Male
Sikh
One who longs for the divine light, Light of the beloved
Boy/Male
Indian, Sanskrit
Peacock
Female
Hawaiian
Hawaiian form of Latin Magdalena, MAKELINA means "of Magdala."
Boy/Male
Hindu, Indian
King of Mercy; Star of King
Boy/Male
Indian
King of serpents.
Boy/Male
Anglo, Australian, British, English
From the Stone Fortification
Male
Italian
Italian form of Basque Xavier, XAVIERO means "a new house."
Girl/Female
Biblical
Multiplying, sowing sedition, a window, a locust.
Boy/Male
Gujarati, Hindu, Indian, Kannada, Malayalam, Marathi, Telugu
Green
Girl/Female
Indian, Sikh
Poetry; Poet; Poem
MACHINE CONTROL
MACHINE CONTROL
MACHINE CONTROL
MACHINE CONTROL
MACHINE CONTROL
imp. & p. p.
of Machine
n.
In general, any combination of bodies so connected that their relative motions are constrained, and by means of which force and motion may be transmitted and modified, as a screw and its nut, or a lever arranged to turn about a fulcrum or a pulley about its pivot, etc.; especially, a construction, more or less complex, consisting of a combination of moving parts, or simple mechanical elements, as wheels, levers, cams, etc., with their supports and connecting framework, calculated to constitute a prime mover, or to receive force and motion from a prime mover or from another machine, and transmit, modify, and apply them to the production of some desired mechanical effect or work, as weaving by a loom, or the excitation of electricity by an electrical machine.
n.
Any one of numerous species of Diptera belonging to Tachina and allied genera. Their larvae are external parasites of other insects.
a.
A picture representing some marine subject.
a.
Formed by the action of the currents or waves of the sea; as, marine deposits.
n.
Machines, in general, or collectively.
n.
A political organization arranged and controlled by one or more leaders for selfish, private or partisan ends.
v. t.
To subject to the action of machinery; to effect by aid of machinery; to print with a printing machine.
n.
A combination of persons acting together for a common purpose, with the agencies which they use; as, the social machine.
n.
One who or operates a machine; a machinist.
a.
Of or pertaining to cows; pertaining to, derived from, or caused by, vaccinia; as, vaccine virus; the vaccine disease.
n.
The working parts of a machine, engine, or instrument; as, the machinery of a watch.
pl.
of Tachina
a.
Of or pertaining to machines.
n.
Supernatural agency in a poem, or a superhuman being introduced to perform some exploit.
v. t.
To contrive, as a plot; to plot; as, to machinate evil.
a.
Of or pertaining to the sea; having to do with the ocean, or with navigation or naval affairs; nautical; as, marine productions or bodies; marine shells; a marine engine.
v. t.
To wind marline around; as, to marline a rope.